Good quality Conductive Copper Foil Tape - ED Copper Foils for Li-ion Battery (Double-shiny) – CIVEN

Short Description:

Product Detail

Product Tags

Feedback (2)

We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Copper Foil Roll, Adhesive Copper Sheet, Emc Copper Foil, We sincerely hope to provide you and your company with a great start. If there is anything we will do to suit your needs, we shall be additional than pleased to do so. Welcome to our manufacturing facility for stop by.

Good quality Conductive Copper Foil Tape - ED Copper Foils for Li-ion Battery (Double-shiny) – CIVEN Detail:

Product Introduction

Electrolytic copper foil for lithium batteries is a copper foil developed and produced by CIVEN METAL specifically for the lithium battery manufacturing industry. This electrolytic copper foil has the advantages of high purity, low impurities, good surface finish, flat surface, uniform tension, and easy coating. With higher purity and better hydrophilic, the electrolytic copper foil for batteries can effectively increase the charge and discharge times and extend the cycle life of batteries. At the same time, CIVEN METAL can slit according to customer’s requirements to meet customer’s material needs for different battery products.

Specifications

CIVEN can provide double-sided optical lithium copper foil in different widths from 4.5 to 20µm nominal thickness.

Performance

The products have the characteristics of symmetrical double-sided structure, metal density close to the theoretical density of copper, very low surface profile, high elongation and tensile strength (see Table 1).

Applications

It can be used as anode carrier and collector for lithium-ion batteries.

Advantages

Compared with single-sided gross and double-sided gross lithium copper foil, its contact area increases exponentially when it is bonded with the negative electrode material, which can significantly reduce the contact resistance between the negative electrode collector and the negative electrode material and improve the symmetry of the negative electrode sheet structure of lithium-ion batteries. Meanwhile, the double-sided light lithium copper foil has good resistance to cold and heat expansion, and the negative electrode sheet is not easy to break during the charging and discharging process of the battery, which can prolong the service life of the battery.

Table1. Performance

Test Item	Unit	Specification
Test Item	Unit	6μm	7μm	8μm	9/10μm	12μm	15μm	20μm
Cu Content	%	≥99.9
Area Weight	mg/10cm²	54±1	63±1.25	72±1.5	89±1.8	107±2.2	133±2.8	178±3.6
Tensile Strength(25℃)	Kg/mm²	28~35
Elongation(25℃)	%	5~10			5~15			10~20
Roughness(S-Side)	μm(Ra)	0.1~0.4
Roughness(M-Side)	μm(Rz)	0.8~2.0						0.6~2.0
Width Tolerance	Mm	-0/+2
Length Tolerance	m	-0/+10
Pinhole	Pcs	None
Change of Color	130℃/10min 150℃/10min	None
Wave or Wrinkle	—-	Width≤40mm one allow						Width≤30mm one allow
Appearance	—-	No drape, scratch, pollution, oxidation, discoloration and so on that effect using
Winding method	—-	The winding when facing up S sideWhen the winding tension in the stable, no loose roll phenomenon.

Note: 1. Copper foil oxidation resistance performance and surface density index can be negotiated.

2. The performance index is subject to our testing method.

3. The quality guarantee period is 90 days from the date of receipt.

Product detail pictures:

Related Product Guide:

Our primary purpose is to give our shoppers a serious and responsible company relationship, giving personalized attention to all of them for Good quality Conductive Copper Foil Tape - ED Copper Foils for Li-ion Battery (Double-shiny) – CIVEN , The product will supply to all over the world, such as: Jamaica, Jordan, Marseille, we are fully determined to control the whole supply chain so as to provide quality products at competitive price in a timely manner. We are keeping up with the advanced techniques, growing through creating more values for our clients and society.

Annealed Copper Foil